Koodu dị iche iche
Igwe igwe ihe nkedo
Koodu dị iche iche ezipụta nhọrọ na atụmatụ ndị ọzọ na moto ọkọlọtọ. Edepụtara atụmatụ ndị achọrọ dị ka koodu dị iche iche ọnụọgụ atọ n'usoro moto. Rịba ama na enwere ụdị dị iche iche enweghị ike ijikọ ọnụ.
Ọtụtụ n'ime koodu dị iche iche na-emetụta IE2, IE3, na IE4 moto. Agbanyeghị, gosi na enwere ụdị dị iche iche maka moto IE3 na IE4 na ụlọ ọrụ ịre ahịa ABB gị tupu ị nye iwu.
Ogo ya | ||||||||||||||||||
Koodu/ihe dị iche | 71 | 80 | 90 | 100 | 112 | 132 | 160 | 180 | 200 | 225 | 250 | 280 | 315 | 355 | 400 | 450 | ||
ochichi | ||||||||||||||||||
529 | Customer witnessed visual inspection of complete order line. | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
530 | Mgbatị afọ abụọ na akwụkwọ ikike ọkọlọtọ | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
531 | Sea freight packing | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
533 | Wooden sea freight packing | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ||
590 | Mounting of customer supplied part other than coupling | - | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | - | |
683 | Prepared for ABB Ability Smart Sensor | - | - | - | - | - | - | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
684 | ABB Ability Smart sensor mounted | - | - | - | - | - | - | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
Idozi nguzo | ||||||||||||||||||
417 | Vibration acc. to Grade B (IEC 60034-14) | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
423 | Balanced without key. | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
424 | Full-key balancing | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
Bearings and Lubrication | ||||||||||||||||||
036 | Transport lock for bearings. | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
037 | Roller bearing at D-end. | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
39 | Cold-resistant grease | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
40 | Heat-resistant grease | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
41 | Bearings regreasable via grease nipples. | ● | ● | ● | ● | ● | ● | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | |
43 | SPM compatible nipples for vibration measurement | ● | ● | ● | ● | ● | ● | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | |
57 | 2RS bearings at both ends. | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | - | - | - | - | - | |
58 | Njikọ kọntaktị akụkụ n'akụkụ dị na D-ngwụcha, ike ogwe pụọ na ibu. | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
59 | Angular contact bearing at N-end, shaft force towards bearing. | - | - | - | - | - | - | - | - | - | - | ● | ● | ● | ● | ● | ● | |
60 | Angular contact bearing at D-end, shaft force towards bearing. | - | - | - | - | - | - | - | - | - | - | ● | ● | ● | ● | ● | ● | |
61 | Njikọ kọntaktị n'akuku na N-ngwụcha, ogwe aka pụọ na ibu. | - | - | - | - | - | - | - | - | - | - | ● | ● | ● | ● | ● | ● | |
107 | Pt100 2-wire in bearings. | - | - | - | - | - | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
128 | Double PT100, 2-wire in bearings | - | - | - | - | - | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
129 | Double PT100, 3-wire in bearings | - | - | - | - | - | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
130 | Pt100 3-wire in bearings. | - | - | - | - | - | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
188 | 63-series bearing in D-end | ● | ● | ● | ● | ● | ● | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | |
194 | 2Z bearings tee maka ndụ na nsọtụ abụọ | ○ | ○ | ○ | ○ | ○ | ○ | ● | ● | ● | ● | ● | - | - | - | - | - | |
420 | Bearing mounted PTC thermistors | - | - | - | - | - | - | - | - | - | - | - | ● | ● | ● | ● | ● | |
433 | Outlet grease collector | - | - | - | - | - | - | - | - | - | - | - | ● | ● | ● | ● | ● | |
506 | Ọnụ ara maka nha ịma jijiji: SKF Marlin Ngwa njikọ ngwa ngwa CMSS-2600-3 |
- | - | - | - | - | - | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
593 | Bearings grease suitable for food and beverage industry. | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
654 | Provision for vibration sensors (M8x1) | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
795 | Lubrication information plate | - | - | - | - | - | - | ● | ● | ● | ● | ● | ○ | ○ | ○ | ○ | ○ | |
796 | Grease nipples JIS B 1575 PT 1/8 Type A | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
797 | Stainless steel SPM nipples | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
798 | Stainless steel grease nipples | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
799 | Grease nipples flat type DIN 3404, thread M10x1 | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
800 | Grease nipples JIS B 1575 PT 1/8” pin type | - | - | - | - | - | - | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
Echere | ||||||||||||||||||
517 | KFB holding brake | - | - | - | - | - | - | - | - | - | - | - | ● | ● | ● | - | - | |
518 | SFB-SH holding brake | - | - | - | - | - | - | - | - | - | - | - | ● | ● | ● | ● | - | |
Branch standard designs | ||||||||||||||||||
142 | Manilla connection. | - | - | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | - | - | - |
○ = Agụnyere dị ka ọkọlọtọ │ ● = Ọ dị ka nhọrọ │ - = Ọdịghị
Ogo ya | ||||||||||||||||||
Koodu/ihe dị iche | 71 | 80 | 90 | 100 | 112 | 132 | 160 | 180 | 200 | 225 | 250 | 280 | 315 | 355 | 400 | 450 | ||
172 | Smoke venting specification, 300 ºC, 1 hour, DOL use, class F300 ac cording to EN 12101-3 |
- | - | - | - | - | - | - | - | - | - | - | ● | ● | ● | ● | - | |
173 | Smoke venting specification, 200 ºC, 2 hours, DOL use, class F200 Dị ka EN 12101-3 si kwuo |
- | - | - | - | - | - | - | - | - | - | - | ● | ● | ● | ● | - | |
174 | Smoke venting specification, 400 ºC, 2 hours, DOL use, class F400 Dị ka EN 12101-3 si kwuo |
- | - | - | - | - | - | - | - | - | - | - | ● | ● | ● | ● | - | |
177 | Design for high ambient applications | - | - | - | - | - | - | ● | ● | ● | ● | ● | - | - | - | - | - | |
178 | Stainless steel / acid proof bolts. | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
204 | Jacking bolts for foot mounted motors | - | - | - | - | - | - | ● | ● | ● | ● | ● | ● | ● | ○ | ○ | ○ | |
209 | Non-standard voltage or frequency, (special winding). | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
386 | Smoke venting specification, 200 ºC, 2 hours, VSD use, Class F200 according to EN 12101-3. |
- | - | - | - | - | - | - | - | - | - | - | ● | ● | ● | ● | - | |
387 | Smoke venting specification, 300 ºC, 1 hour, VSD use, Class F300 ac cording to EN 12101-3 |
- | - | - | - | - | - | - | - | - | - | - | ● | ● | ● | ● | - | |
389 | Smoke Venting specification, 400 ºC, 2 hours, VSD use, Class F400 Dị ka EN 12101-3 si kwuo |
- | - | - | - | - | - | - | - | - | - | - | ● | ● | ● | ● | - | |
392 | Smoke Venting specification, 250 ºC, 2 hours, DOL use, Class T250 | - | - | - | - | - | - | - | - | - | - | - | ● | ● | ● | ● | - | |
393 | Smoke venting specification, 250 ºC, 2 hours, VSD use, Class T250 | - | - | - | - | - | - | - | - | - | - | - | ● | ● | ● | ● | - | |
396 | Motor designed for minimum ambient temperature -20 °C to -40 °C, with space heaters (code 450/451 must be added) |
● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
397 | Motor designed for minimum ambient temperature -40 °C to -55 °C, with space heaters (code 450/451 must be added) |
- | - | - | - | - | - | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
398 | Motor designed for minimum ambient temperature -20 °C to -40 °C | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
399 | Motor designed for minimum ambient temperature -40 °C to -55 °C | - | - | - | - | - | - | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
425 | Corrosion protected stator and rotor core. | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
524 | Special run-out tolerances on flange and shaft for close coupled pump applications. |
- | - | - | - | - | - | - | - | - | - | - | ● | ● | ● | - | - | |
625 | Design for mining applications | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | - | |
786 | Special design shaft upwards (V3, V36, V6) for outdoor mounting. | - | - | - | - | - | - | ● | ● | - | ● | ● | - | - | - | - | - | |
877 | Design for high ambient applications, motor without fan and fan cover |
- | - | - | - | - | - | ● | ● | ● | ● | ● | - | - | - | - | - | |
jụrụ usoro | ||||||||||||||||||
44 | Unidirectional fan for reduced noise level. Rotation clockwise seen from D-end. Available only for 2-pole motors. |
- | - | - | - | - | - | - | - | - | - | - | ● | ● | ● | ● | ● | |
45 | Unidirectional fan for reduced noise level. Rotation counter clockwise seen from D-end. Available only for 2-pole motors. |
- | - | - | - | - | - | - | - | - | - | - | ● | ● | ● | ● | ● | |
68 | Light alloy metal fan | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
75 | Cooling method IC418 (without fan). | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
183 | Separate motor cooling (fan axial, N-end). | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
206 | Steel fan | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
422 | Separate motor cooling (on top) with integrated fan motor | - | - | - | - | - | - | - | - | - | - | - | ● | ● | ● | ● | ● | |
514 | Separate motor cooling (fan on top) | - | - | - | - | - | - | - | - | - | - | - | ● | ● | ● | ● | ● | |
791 | Stainless steel fan cover | - | - | - | - | - | - | - | - | - | ● | ● | ● | ● | ● | ● | ● | |
Mmekota | ||||||||||||||||||
35 | Assembly of customer supplied coupling-half | - | - | - | - | - | - | - | - | - | - | - | ● | ● | ● | ● | ● | |
Documentation | ||||||||||||||||||
141 | Binding 2D main dimension drawing. | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
370 | Motor model drawing in 3D | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
374 | Binding 2D motor detailed drawing | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
536 | Photos of manufactured motors | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
537 | Advanced data sheet | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
722 | Rotor dimension drawing (incl. torosional stiffness) | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
777 | Premium documentation package | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
Igbapu oghere | ||||||||||||||||||
65 | Plugged existing drain holes. | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
448 | Draining holes with metal plugs. | - | - | - | - | - | - | - | - | - | - | - | ● | ● | ● | ● | ● | |
Earthing Bolt | ||||||||||||||||||
67 | External earthing bolt | ● | ● | ● | ● | ● | ● | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | |
525 | External earthing bolts on motor feet | - | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
Gburugburu Ebe Ndị Dị Egwu | ||||||||||||||||||
456 | Ex ec IIC T3 Gc acc. IEC/EN 60079-7 with certificates. | - | - | - | - | - | - | - | - | - | - | - | ● | ● | ● | - | - | |
Ihe na-ekpo ọkụ | ||||||||||||||||||
450 | Heating element, 100-120 V | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
451 | Heating element, 200 - 240 V | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● |
○ = Agụnyere dị ka ọkọlọtọ │ ● = Ọ dị ka nhọrọ │ - = Ọdịghị
Ogo ya | ||||||||||||||||||
Koodu/ihe dị iche | 71 | 80 | 90 | 100 | 112 | 132 | 160 | 180 | 200 | 225 | 250 | 280 | 315 | 355 | 400 | 450 | ||
14 | Winding insulation class H. | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
405 | Special winding insulation for frequency converter supply | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
406 | Winding insulation for supply > 690 <= 1000 volts | - | - | - | - | - | - | - | - | ● | ● | ● | ● | ● | ● | ● | ● | |
agha mmiri | ||||||||||||||||||
24 | Fulfilling Bureau Veritas (BV) requirements, with certificate. | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
25 | Fulfilling Det Norske Veritas (DNV) requirements, with certificate. | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
26 | Fulfilling Lloyds Register of Shipping (LR) requirements, with certifi | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
kateeti. | ||||||||||||||||||
27 | Fulfilling American Bureau of Shipping (ABS) requirements, with | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
asambodo | ||||||||||||||||||
49 | Fulfilling Germanischer Lloyd (GL) requirements, with certificate. | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
50 | Fulfilling Registro Italiano Navale (RINA) requirements, with certifi | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
kateeti. | ||||||||||||||||||
51 | Fulfilling Russian Maritime Register of Shipping (RS) requirements, | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
with certificate. | ||||||||||||||||||
96 | Fulfilling Lloyds Register of Shipping (LR) requirements, without | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
certificate (non-essential duty only) | ||||||||||||||||||
186 | Fulfilling Det Norske Veritas (DNV) requirements, without certificate | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
481 | Fulfilling Nippon Kaiji Kyokai (NK) requirements, with certificate | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
483 | Fulfilling China Classification Societies (CCS) requirements (Beijing), | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
with certificate. | ||||||||||||||||||
484 | Fulfilling Korea Register of Shipping (KR) requirements, with certifi | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
kateeti. | ||||||||||||||||||
491 | Fulfilling Nippon Kaiji Kyokai (NK) requirements, without certificate. | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
492 | Fulfilling Registro Italiano Navale (RINA) requirements, without | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
asambodo | ||||||||||||||||||
493 | Fulfilling China Classification Societies (CCS) requirements (Beijing), | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
without certificate. | ||||||||||||||||||
494 | Fulfilling Korea Register of Shipping (KR) requirements, without | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
akwụkwọ | ||||||||||||||||||
496 | Fulfilling Bureau Veritas (BV) requirements, without certificate(non | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
essential duty only) | ||||||||||||||||||
497 | Fulfilling Russian Maritime Register of Shipping (RS) requirements, | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
without certificate. | ||||||||||||||||||
675 | Fulfilling American Bureau of Shipping (ABS) requirements, without | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
certificate (non-essential duty only) | ||||||||||||||||||
676 | Fulfilling Germanischer Lloyd (GL) requirements, without certificate | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
(non-essential duty only) | ||||||||||||||||||
Mounting arrangements | ||||||||||||||||||
8 | IM 2101 foot/flange mounted, IEC flange, from IM 1001 (B34 from | ● | ● | ● | ● | ● | ● | - | - | - | - | - | - | - | - | - | - | |
B3). | ||||||||||||||||||
9 | IM 2001 foot/flange mounted, IEC flange, from IM 1001 (B35 from | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
B3). | ||||||||||||||||||
47 | IM 3601 flange mounted, IEC flange, from IM 3001 (B14 from B5). | ● | ● | ● | ● | ● | ● | - | - | - | - | - | - | - | - | - | - | |
64 | NEMA D-flange | - | - | - | - | - | - | - | - | - | - | - | - | - | ● | - | - | |
66 | Modified for specified mounting position differing from IM B3 | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
(1001), IM B5 (3001), B14 (3601), IM B35 (2001), IM B34 (2101) | ||||||||||||||||||
305 | Additional lifting lugs. | - | - | - | - | - | - | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
320 | IM2001 foot/flat bottom flange mounted, from IM1001 (B35 flat bot | ● | ● | ● | ● | ● | ● | - | - | - | - | - | - | - | - | - | - | |
tom flange from B3) | ||||||||||||||||||
Mbelata mkpọchi | ||||||||||||||||||
55 | Noise reduction cover for foot mounted motor | - | - | - | - | - | - | - | - | - | - | - | ● | ● | ● | ● | ● | |
sere | ||||||||||||||||||
105 | Paint thickness report | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
114 | Special paint color, standard grade | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
115 | Painting system C4M acc. to ISO 12944-2: 1998 | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
168 | Primer paint only. | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
303 | Painted insulation layer on inside of the terminal boxes. | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
710 | Thermally sprayed zink metallizing with acrylic top coat | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
711 | Painting system C5-M very high, acc. to ISO 12944-5:2007 | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
712 | Painting system C5-M according to Petrobras specification. | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
713 | Painting system according Total Egina specification. | - | - | - | - | - | - | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
754 | Painting system C5M acc. to ISO 12944-2:1998 | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
755 | Norsok M-501 revision 6, Coating system no. 1 | - | - | - | - | - | - | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
nchedo |
○ = Agụnyere dị ka ọkọlọtọ │ ● = Ọ dị ka nhọrọ │ - = Ọdịghị