No -Fault Warranty
Motors with frame sizes 215T and smaller are covered under a “No
Fault” warranty. This warranty claim is offered one time, per end-user,
per application. If there is more than one failure, please contact the
Service Department for review. The following must be sent to the WEG
Service Department to process a “No-Fault” warranty claim.
Original nameplate from the failed motor (or, for a Shark-line motor, its
terminal box cover)
Copy of the original WEG invoice or invoice # for the failed motor
Brief description of the failure for quality control purposes
Please send request no later than 30 days after failure.
Warranty on Larger Motors
WEG Electric requires that motors larger than 215T frame be inspected
by a WEG Authorized Service Center, or if none is available, an EASA-af
filiated service shop. Depending on the inspection results, WEG will
decide whether to cover the motor under warranty. Prior to a decision
being made on a claim for warranty, the following are required from the
service shop and customer.
Completed EASA inspection report
Repair Quote
Copy of the original WEG Invoice or WEG Invoice Number
For Frame 215T and above, photos of the failure in JPEG format
suitable for e-mailing
The inclusion of photos allows WEG to properly evaluate the details of
your claim, as well as to ensure that any data sent to our factory Quality
Control engineers are fully understood. The warranty claim will be evalu
ated after receipt of the above items. Upon review of the claim, the WEG
Service Department will make contact and advise how to proceed. The
service shop should not remove the nameplate nor make repairs without
being requested to do so by a WEG Service Department representative.
NOTE: For all Ingersoll-Rand motors, please contact the WEG Service
Department prior to any inspection.
Communication
Correspondence with the WEG Service Department may be via e-mail,
fax or regular mail. Please keep a photocopy of all nameplates for your
ihe ndekọ.
Akwụkwọ ikike amachiri:
WEG Electric Corp. is proud of all of our product lines. WEG and its
employees are committed to our customers and users to provide the
best designed and manufactured motors, drives and controls. WEG
provides a limited warranty on our products against defects in materials
and workmanship for a specific period from the date of purchase. If a
motor’s date code is within its stated warranty period (18 month, 36
month, etc.), no proof of purchase is required. Otherwise, a copy of the
invoice is necessary to show the date of purchase.
Oge Akwụkwọ ikike:
The standard warranty for WEG products is 18 months from the
akwụkwọ ọnụahịa.
For General Purpose TEFC and ODP Premium Efficiency motors the
warranty is 36 months from the invoice date.
For IEEE 841 motors, the warranty is 60 months from the invoice date.
Servicelọ Ọrụ Ikike Ikike:
WEG has service centers around the world to meet the needs of our
customers. Information regarding the nearest service center can be
found on our web site at www.weg.net/us or by calling 1-800-ASK-4WEG
(1-800-275-4934). Any warranty repair by a service shop must be
pre-approved by WEG.
Akwụkwọ ikike Service:
If a WEG product requires warranty service due to defective materials or
workmanship, WEG will, at its option, either repair or replace the defec
tive product. By “replace”, WEG means the original purchaser’s account
will be credited for the cost on the WEG invoice (less freight). If warranty
is granted, and replacement is specified, the motor’s nameplate must
be sent to the Service Dept. Warranty is applied to products that have
been, at all times, properly maintained and operated or used under
normal operating conditions for which the product was designed. WEG is
not responsible for any expenses incurred in installation, removal from
service, transportation (freight) or consequential expenses.
Mmachi nke Akwụkwọ ikike:
THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL
OTHER WARRANTIES OF QUALITY AND PERFORMANCE, WRITTEN, ORAL
OR IMPLIED, AND ALL OTHER WARRANTIES INCLUDING ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE OR ARISING FROM COURSE OF DEALING OR USAGE OF TRADE
ARE HEREBY DISCLAIMED BY WEG. THE FOREGOING OBLIGATION TO RE
PAIR OR REPLACE WEG PRODUCTS OR PARTS SHALL BE THE SOLE AND
EXCLUSIVE REMEDY OF THE PURCHASER, ITS CUSTOMERS, OR USERS
OF THE PRODUCTS OR PARTS.
Proper Storage of Motors:
When motors are not immediately installed, they should be stored in
their normal upright position in a dry even temperature location, free
of dust, gases and corrosive atmosphere. Inactive motors tend to expel
grease from between the bearing surfaces, thereby removing the
protective film that impedes metal-to-metal contact. At least once per
month shafts should be rotated in accordance with WEG’s installation
and maintenance manual. Motors stored for a period exceeding one
year should have the bearings re-lubricated in accordance with the WEG
motor installation and maintenance manual.
Gbanwee iwu
WEG products that are purchased from our stocking warehouses must
be returned within 90 days, freight to be paid by customer. Returned
products must be unused, and in undamaged original packaging.
If products are ordered incorrectly by the customer and need to be
returned to stock, then a 20% re-stocking charge will be applied. If an
order of equal or greater amount is placed at the time of the return, then
the fee will be reduced to 10%. If the returned products are deemed not
to be in unused, undamaged condition, or in original packaging, then
additional fees will be applied (up to and including full price of item).
Returns on any modified products will not be allowed. Any products that
are ordered as specials (with features that would not allow them to be
stocked items) cannot be returned.
Part Number Configuration
WEG model numbers contain up to 20 characters, distributed as follows:
HP1 - .12 - .16 - .25 - .33 - .50 - .75 - 001 - 0015 - 002 - 003 - 004 - 0045 - 005 - 007 - 010 - 015 -
020 - 025 - 030 - 040 - 050 - 075 - 100 - 125 - 150 - 200 - 250 - 300 - 400 - 450 - 500 - 600 - 650 ...
RPM -
36: 3600rpm
18: 1800rpm
12: 1200rpm
09: 900rpm
30: 3000rpm
15: 1500rpm
10: 1000rpm
07: 750rpm
Model - Three Characters:
X
X
X
Mkpọchi
EGO
EGO
E - Totally Enclosed
S - Standard Efficiency
1 - 1 Phase
S - Severe Duty IEEE 841
P - High Efficiency
3 - 3 Phase
O - Open drip proof
T - NEMA Premium
X - eXplosion proof
G - Super Premium
A - Totally Enclosed Air Over
N - Totally Enclosed Non Ventilated
Application / Feature
1) • For IEC Metric motors, the output will be given in kW:
.12 - .18 - .25 - .37 - .55 - .75 - 001 - 0015 - 002 - 003 - 004 - 0045 - 005 -
007 - 009 - 011 - 015 - 018 - 022 - 030 - 037 - 045 - 055 - 075 - 090 - 110 -
130 - 150 - 185 - 200 - 220 - 250 - 300 - 315 ...
0015 (1.5HP) is the rating that will have four digits for output Identification and
only one for RPM.
0045 (4.5kW) is the rating that will have four digits for output identification and
only one for RPM.
etiti
The frame number must be included as long as the number of remaining
characters allows.
Example: 143T, 143TC, 405T, 405TS, 184JP.
XXXX Suffix
–W22, –W2, –W or W = W22 platform
–W22S, –W2S or –WS = Single punched feet
–W22G, –W2G or –WG = Aegis Ring Inside
–S = New Rolled Steel platform
–SG = New Rolled Steel / Aegis Ring inside
xxx
XX
xxx
X
MMBXX
(HP)
(Rpm)
(Model) (Volts)
(Application + Frame)
ịtụ
* Suitable for PWS on 254T and larger on low voltage connection.
AD
-
AL
-
AX
-
BM
-
CD
-
CT
-
EC
-
FD
-
FL
FP
-
HP
-
IE
-
JP
-
KD
-
OL
-
OW
-
PF
-
PM
-
R
-
RB
-
RB
-
RS
-
SA
-
SP
-
SS
-
VD
-
Auger Drive
ALuminum Frame
ATEX Motor
Brake moto
Compressor Duty
Towerlọ ndozi
Evaporative oyi
Farm Duty
Footless for Fractionals (after frame)
Mgbapụta Ọkụ
Ngwunye Hydraulic
IEEE 841 (Severe Duty IEEE 841)
Jet mgbapụta
Crusher-Duty
Manual OverLoad Protection
Oil Well Pumping
Poultry Fan
Pad Mount
(Before the frame size): Round Body
Roller Bearings (Integrals)2
Resilient Base (Fractionals)
Rolled Steel Frame
Saw Arbor
Gbasaa Oge
Igwe anaghị agba nchara
Vector Duty (TEBC or TENV)
XXX
When Applicable
Volta
A - 115V
L - 415V
B - 115 / 208 - 230V
M - 220 / 380 - 415V
C - 208 - 230V
N - 220 / 380V
D - 230V
O - 380 - 415V
E - 208 - 230 / 460V*
P - 200V
F - 230 / 460V
Q - 460V
G - 460V PWS
R - 115 / 230V
H - 575V
V - 200 / 400V
I - 220V
W - 460 // 220 - 240 / 380 - 415V
J - 380V
X - Other Voltage
K - 190 / 380V
Y - 460 // 380 - 415 / 660 - 690V
2) Roller bearings are recommended for all belt driven applications 100HP
ma n’elu.
For Definite Purpose lines, two pre-selected letters must be used
after voltage code:
Note: WEG accepts major purchasing, debit and credit
cards. Payments using such cards are processed at time
of shipment and subject to available credit at the moment
of the transaction.